Irrigation · Nashville, TN
Irrigation in Cross Plains, TN
Cross Plains irrigation contractors for new sprinkler systems, sprinkler repair, controllers & smart watering and more. Systems designed by zone, backflow tested and certified, a written price for the whole yard, across Robertson County and the rest of Middle Tennessee.
Estimate request
What is the sprinkler system doing, or not doing?
Straight to us, and a reply the same day.
Cross Plains lots, soil and slopes: what they mean for sprinklers
New subdivisions were sodded on graded clay, and the irrigation the builder installed — if any — was the minimum; a redesign by zone is often the difference between sod that lives and sod that does not.
Rural properties may run irrigation from a well, and the pump capacity sets the zone size; a design that ignores the well starves the pressure.
Large lots are many zones and long runs, and the system is phased — the front and the entertaining areas first — because doing an acre at once is where the budget breaks.
Where the property is on a well, the irrigation is designed for the well’s recovery rate and routed clear of the septic field, which is not optional.
The ground is the irrigation design — clay that takes water slowly, rock in the trench, a slope that sheds water — and the zones and the schedule follow it.
Cross Plains at a glance
Irrigation work around this town
Housing stock
Mostly 1980s onward; median build 1994
County
Robertson County
Ground conditions
Rolling farm country on the Highland Rim; deep clay
Permits issued by
The local codes department for Robertson County
In and around Cross Plains:
- Stoneybrook
- Spring Valley Estates
- Chatman Estates
- Chelsea’s Way
Services
Sprinkler and drainage service in Cross Plains
New Sprinkler Systems
Designed zone by zone for head-to-head coverage, your water pressure and the way your yard actually drains.
Learn moreSprinkler Repair
Broken heads, cut lines, stuck valves, wiring faults and the dry patches that are really coverage problems.
Learn moreControllers & Smart Watering
Weather-based controllers programmed for Tennessee seasons instead of the factory default that waters daily.
Learn moreBackflow Testing & Certification
Annual testing and certification, which most Middle Tennessee utilities require on any irrigation connection.
Learn moreDrainage & French Drains
Yard drains, French drains, downspout tie-ins and regrading for ground that holds water or sends it at the house.
Learn moreWinterization & Spring Start-Up
Blow-outs before the first hard freeze and a full system check and adjustment when it comes back on.
Learn moreWhy homeowners here call
Why Cross Plains yards need us
Backflow prevention is the regulatory constant. Most Middle Tennessee utilities require a backflow preventer on any irrigation connection and an annual certified test on it, because an irrigation line is a direct path from standing yard water into the drinking supply. It is not paperwork for its own sake, and a contractor who does not mention it is a contractor to ask more questions of.
- One zone that has stopped coming on at all
- Heads that have sunk below grade or been clipped by a mower
- A system that has never been winterized before a hard freeze
- Dry patches that stay dry no matter how long the system runs
Mixing head types on one zone. Rotors and sprays apply water at completely different rates. On the same zone, one half is drowned and the other is dry.
Nearby
Neighboring towns we cover
FAQ
Irrigation in Cross Plains: common questions
Do you cover Cross Plains, TN?
Yes. Our irrigation technicians cover Cross Plains and all of Robertson County, with White House, Cottontown, Millersville, Greenbrier inside the same routes.
How much does irrigation cost in Cross Plains?
Irrigation in Cross Plains is priced by the zone for a new system — the heads, the valves and the pipe for each — plus the controller and the backflow; a repair is priced by the part and the hour, and the leak is found before the part is named. Rural properties may run irrigation from a well, and the pump capacity sets the zone size; a design that ignores the well starves the pressure.
Who issues permits for irrigation in Cross Plains?
The local codes department for Robertson County and the water utility require a backflow preventer on every irrigation system and an annual test by a certified tester; the paperwork goes to the utility, and the technician files it.
How quickly can you get to Cross Plains?
A broken head or a zone that will not shut off in Cross Plains is seen within a day or two; a new system is designed within the week and installed in a few days once the utility locates are in.
What areas around Cross Plains do you serve?
Irrigation technicians serving Cross Plains also cover White House, Cottontown, Millersville, Greenbrier; the routes run through 96 towns in 12 counties.
Free estimate
Fix the sprinklers at your Cross Plains home
Explain what the Cross Plains system is doing and Nashville's Irrigation replies with a free written estimate covering heads, zones and any backflow testing it needs.